Edge 540 - 67" - PNP - yellow/grey/white - F

SKU: SWED67YEGREWH-PNP

Category: 67" / 90E / 1,7m

Currently out of stock

1.399,00 €

incl. 19% VAT , plus

Choose tax zone / country of delivery

Manufacturers: Skywing RC

Edge 540 - 67" - yellow/grey/white - PNP - Wingspan: 1701mm/67" - Length: 1681mm/66"

Description
Notify me when this item is available

EDGE 540 XA aerobatic plane for the ambitious pilots

A few simple steps need to be done to make a model ready to fly.

The following work has to be done:

Assemble the landing gear
Glue the elevator in place
hinge the rudder
screw the linkages to the servo
install the receiver (not included in the kit)
Place the power battery (not included in the kit)
teach the throttle travel

The entire configuration has been carefully selected and tested over a long period of time. It is not necessary to change the controller settings.

Very quick assembly on the flying field, due to the PATENTED QUICK ASSEMBLY SYSTEM and EASY Servo CONNECTIONS from Skywing for canopy and wing.

Factory hinged and sealed ailerons and elevators, carbon fibre landing gear and carbon fibre tail spar, pre-installed instrument panel in clear canopy.

Incredible price/performance ratio: Including colour-matched spinners, pre-installed servo leads for servos in fuselage and wings, transport bags for wings and SFG.

Technical characteristic

WingspanWingspan	: 1701mm / 67"
Length	: 1681mm / 66"
Wingarea	: 57,5dm2 / 891,25 sq.in
Weight	: approx 3,66kg - 4,10kg / 8lbs-9lbs (depending on battery / 6S LiPo / 4000mAh-5000mAh)

Included accessories

Motor + Controller	: Dualsky 2000.R + Hobbywing Platinum 100A V3 (included in PNP)
Propeller	: 18 x 8 (included in PNP)
High Torque HV Servo	: 4 x SW989 HV (included in PNP)
Servo arm for control surfaces	: 2 x Servoarm 1,25" + 2 x Servoarm 1,5" (included in PNP)

Required accessories

Receiver + Battery

Item information	Value
Shipping weight:	9,80 kg
Item weight:	9,80 kg
Dimensions ( Length × Width × Height ):	153,00 × 55,00 × 37,00 cm

Contact data

E-Mail

Manufacturer according to GPSR
RC SKYWING MODEL, No.8, Nangu Lang Factory Building, S263 Line, Chengzhong Street, Guangdong Province, China, https://www.skywing-rc.com

In stock

CLI Servo

CLI Servo Arm 1.50" - M2,5

8,95 € *